자동화 장비



PrinCE Next|800 Series
상세설명
제품용도 모세관 전기영동 분석기
브랜드 Prince Technologies
제품개요 전문적으로 맟춤 설계된 모듈식 모세관 전기영동 분석기

제품소개

 

Prince Technologies의 NEXT 시리즈는 연구자의 가능한 모든 요구에  맞게 전문적으로 맟춤 설계된 모듈식Capillary electrophoresis 분석기입니다.

제품특징


유저의 application에 따라 capillary 길이 선택 가능 

Configurable sample adapters for inserts, vials and 96 well plates

외부 원격 검출기 셀을 위한 충분한 Capillary compartment 공간 제공으로 완전히 새로운 연구 가능성 제공

•고용량 96 well plate handling

•탁월한 injection 정확도

buffer/sample 각각 온도 조절 가능

detection techniques 선택 가능

제품사양 

 

System

Choice of 4 models (840/850/870/875)

Autosampler

XYZ-Sampler (Inlet ) and YZ-Sampler (Outlet) or Flexible Outlet (840)

Buffer/Sample Positions

Inlet Buffer: 50 positions
Inlet Sample: 50 positions optional 96 positions (1x 96 well plate)
Outlet: 20 positions or (optional) flexible outlet

Injection Modes

Hydrodynamic & Electrokinetic

Voltage Range

-30 to +30 kV

Current Range

-300  to +300 µA

Power Range

-9 to +9 W

Run the Method

Voltage, Current & Power can be programmed at the same time with Pressure

Continues Measurement

Yes

Sample Pressure range

-230 to 300mbar

Programmable Range

> 10,000 seconds

Configuration Units

mbar, bar, psi, kV, V, µA, W, min, W, mW, min, s, H.M.S. ºC & ºF

Flush Pressure Range

300 up to 3500 mbar 
Up tot 10 bars (external)

Type of Vials

100 or 300 µl (Propylene or glass)
1.5ml (Propylene)
2 ml (glass)
Choice range of 96 well plate (V- and F- bottom)

Type of Covers

Resealing patented cap 
X-Pierce sealing film or cap mat

Sample Temperature Range

Sample: 4 - 60 ºC

Buffer Temperature Range

Buffer: 17 - 40 ºC

Capillary Oven Compartment Size

Large; room for installing external detector cell/devices

Capillary Temperature Range

4 - 60 ºC (840/850)
4 - 55 ºC (870/875)

Capillary Cassette

Open; room for installing external detector cell/devices

Capillary Length

Total minimum 40 cm and 30cm (with PrinCE-C 700 series)
Compatibility OD: 200-365 µm
Special version: 150 µm

Effective Capillary Length

PrinCE Next
Standard:  fixed positions: from  10, 20 and 30cm
Special version: from 8.5cm

External Detectors

Integrated DAD
LIF/LED, CCD & MS (different suppliers)

Integrated DAD

Two types (870 & 875)

Integrated DAD

870
Wvl range: 190- 610nm
Wvl accy: <0.3nm
Resp time: 12ms to 10s

Bandwith

Average, Minimum & Maximum

CE-MS

Easier connect to MS
Shorter capillary Length
No special cassette required


 

주문정보

 

 

 Part No.

 Model

 Description

0005.520

  PrinCE Next|840

• Temperature controlled inlet autosampler - 50/96* sample and 50 buffer positions

• Temperature controlled capillary compartment HVPS

• pre-installed PrinCE Next Clarity software, PC and a start-up kit  

0005.530

  PrinCE Next|850

• Temperature controlled inlet autosampler - 50/96* sample and 50 buffer positions

• Outlet autosampler 20 buffer positions

• Temperature controlled capillary compartment, HVPS 

• Selectable external pressure (up to 10bar) 

• pre-installed PrinCE Next Clarity software, PC and a start-up kit  

0005.550

  PrinCE Next|870

• Integrated DAD detector 190-610 nm 

• Temperature controlled inlet autosampler 50/96*sample and 50 bufer positions

• Outlet autosampler 20 buffer positions 

• Temperature controlled capillary compartment, HVPS

• Selectable external pressure (up to 10bar) 

• pre-installed PrinCE Next Clarity DAD software, PC and a start-up kit  

0005.560

  PrinCE Next|875

• Integrated DAD detector 190-1010 nm

• Temperature controlled inlet autosampler 50/96* sample and 50 bufer positions

• Outlet autosampler 20 buffer positions, 

• Temperature controlled capillary compartment, HVPS

• Selectable external pressure (up to 10bar)

• pre-installed PrinCE Next Clarity DAD software, PC and a start-up kit  

* Optional : We reserve the right to alter the specifications of the instruments without prior notice

#  Clarity Advanced software 별도 판매

상단으로
바이오디 네이버 블로그
바이오디 카카오플러스친구